工藝工程師英文簡歷

　　寫個人簡歷不是在寫作文要求有很多的書寫的手法，像是比喻，烘托等等，在書寫個人簡歷的時候就是將最沒有用的詞語去除，留下最有價值的詞語。這樣才能真正的達到了書寫個人簡歷的時候的簡明性原則了。不要無謂的形容詞和語氣詞。要客觀講述，這樣最為簡單明了。

　　招聘用人單位的HR們在游覽我們的個人簡歷的時候僅僅有15秒鐘的時間，如果太多的廢話就讓我的個人簡歷大打折扣。寫個人簡歷不是寫作文，如果又看到類似作文一樣的個人簡歷，本來可以簡短的20個字就可以說清楚的事情，非要整的洋洋灑灑的寫上了200字左右。想想HR們會夸獎我們文采還是直接的將我們的個人簡歷丟掉垃圾筐中。社會是講究利益和效率的，是不會想學校一樣將什么文學，講什么文采的。能夠使用 10個字講清的事情絕不實用11個字來描述，這就是書寫個人簡歷的簡明性原則。

　　下面是yjbys小編和大家分享的工藝工程師英文簡歷，更多內容請關注簡歷模板欄目。

　　篇一：簡歷模板

　　yjbys

　　Nationality:China (Mainland)

　　Current Place:DongguanHeight/Weight:172 cm?62 kg

　　Marital Status:SingleAge:27 years

　　Career Objective

　　Application type:Jobseeker

　　Preferred job title:Engineering/Draftsman: IE engineer 、 Engineering/Draftsman: PE engineer 、 Project Manager/Supervisor: Project engineer

　　Working life:4Title:No title

　　Job type:Full timeExpected Start date:In a month

　　Expected salary:￥5,000--￥8,000Preferred working place:Guangdong province

　　Work experience

　　Company's name:Dongguan Ergotron Precision Technology Co.,LtdBegin and end date: 2007-08-

　　Enterprise nature:Sino-foreign joint venturesIndustry: Communication/Telecom/Network Equipment

　　Job Title: Process Engineer

　　Job description: 1.Compile the SOP, FMEA,FAI leading, improve the output capability of the production line .

　　2.New model introduce, ass'y the sample, arrange the stations of the line, analyze and solve the issue in the line.

　　3.Accountable for analyzing and solving the issue in the production line .

　　4.Accountable for evaluating the CPA of the vendors and analysis reporting.

　　5.Accountable for the running of the ass'y line,making the response immediately to the issue of line,giving the containment action,analyzing and finding the root cause,giving the correct action ,preparing the report, guarding against happened again.

　　6.Accountable for implementing project of cost down. Cutting down the cost of production.

　　7.Accountable for improving the PPH of production line. Then improving the production capacity.

　　Reasons for leaving:

　　Company's name:China Petrol First Construction corporationBegin and end date: 2006-07-2007-07

　　Enterprise nature:State-owned enterprisesIndustry: Petroleum/Chemical Industry/Minerals/Geology

　　Job Title: Technician

　　Job description: 1. Accountable for all the necessary preparations for the project.

　　2. Accountable for control the schedule of project, trouble shooting the technical issue.

　　3. After complete the project. Accountable for inspecting the trial run of this machine and making the report.

　　Reasons for leaving: For further development

　　Educational Background

　　Name of School:Yangtze University

　　Highest Degree:BachelorDate of Graduation:2006-07-01

　　Name of Major 1:EngineeringName of Major 2:

　　Education experience:Start dateEnd dateEducation organizationMajorsCertificateCertificate No

　　2002-092006-07Yangtze UniversityProcess Equipment and Control EngineerinBachelor

　　2007-112007-12Nan ShengdeIE&JIT

　　2008-032008-03JunchengSpecial training about FMEA

　　2012-082012-08MinRa EnterpriseIE seven tools

　　Language Ability

　　Foreign Language:EnglishLevel:perfect

　　Chinese level:perfectCantonese Level:poor

　　Relevant skills and abilities

　　Rich experience in local technical management.

　　1. splendid capability at predicting,analysis,executing and communicating.

　　2. keep synonym in puzzle dom.

　　3. good manners, strong responsibility, great team work.

　　Skills:

　　1.Fluent oral english, rich in manufacturing professional vocabulary .

　　2.Familiar with plastic model , metal material and die-casting.

　　3.Familiar with the procedure of new product introducing.

　　4.Familiar with using IE method.

　　5.Familiar with the theoretical construct of mechanical transmission.

　　6.Finish the design and improvement of the mechanical equipment.

　　7.Analyze the issue with software.

　　8.Familiar with hardware and software, be good at office software, AutoCAD, 3d-max,photoshop and solid works.

　　Self-recommendation letter

　　i was born in wuhan. and I got my bacher degree in Yangtze University from 2002 to 2006. I major in mechanical engineering, from there I got sturdy theories. After graduated I worked in China Petro in Liaoning province. My position is a technician in Liaohe project. I've been there for 1 year. Then i quit that job and went to Guangdong province. In Augest 2007, I got the position of process engineer in Ergotron. I've been here for more than two years. I got much manufacturing knowledge and experience here. Such as IE, trouble shooting ,6 Sigma and so on.

 

　　篇二：簡歷模板

　　yjbys

　　Gender: Male

　　DOB: November 28, 1984 Height: 176cm

　　Present address: East Hengshan Road, Fengman District, Jilin City Marital status: Single

　　Graduation school: Yanbian University

　　Major: Mechanical Layout, Manufacturing and Automation Tel.:*E-mail: *

　　Position to be appointed: Process technology engineer Education and training:

　　2004.8—2008.6, Jilin Province Yanbian University, majoring in mechanical layout (CET Band 4, Computer Test Grade 2)

　　2001.8—2004.6, studied at the Jilin Province Lishu County Senior Middle School

　　1998.8—2001.6, studied at the Jilin Province Lishu County Taiping Middle School

　　Working experience:

　　Aug. 2008—now, I have been working at the Jilin Automobile Co., Ltd. of FAW

　　Introduction:

　　I. Aug. 2008-Dec. 2008，I practiced in all production workshops to know about stamping, painting and welding and process technology of auto of fitting shop.

　　II. Dec. 2008-Jan. 2010, I was engaged in production control in production department and promotion of lean production. I followed improvement experts who have made site improvement and guidance on Dong’an Auto Engine and Shulan General Machinery for half a month. I could master in elementary knowledge of lean production. I could grasp preparation methods of operation manual and essentials book and working procedure capacity list. And I was in charge of site 5S management of all workshops and daily improvement.

　　III. Jan. 2010-now, I have been working as site engineer of fitting shop in charge of site technology management and maintenance of standard operation. I participated in change of circle time of workshop and establishment from circles such as workers, machine, stuff to project layout and made follow-up, implementation and confirmation of policies. I amended standard operations of 15 stations of fitting shop and verified the site operation, equipment security capacity, key points guarantee and personnel qualification and workpiece supply. I submitted 18 improvement requirements and constituted 10 measures which effectively enhanced availability rate of work area and process quality assurance ability.

　　My summary:

　　I am honest and faithful and smart. I have strong study ability and could bear hardships and have good group cooperation spirit. For contacting Japanese workers in daily work, I have learnt earnest and meticulous working ways from staff members of the Toyota. I form good work style and better knowledge structure.

【工藝工程師英文簡歷】相關文章：

工藝工程師英文簡歷表格12-29

工程師的英文簡歷01-14

工程師英文簡歷01-02

英文簡歷（電子工程師）12-25

工程師英文簡歷模板12-28

英文簡歷（工業工程師）12-25

質量工程師英文簡歷01-17

品質工程師英文簡歷02-26

工業工程師英文簡歷12-24

技術工程師英文簡歷01-03